026fe1308c
This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Though generic diag.sh allows to use different LEDs to indicate different states, this patch just moves the old assignment and does not try to "improve" the assignment by using additional colors. However, individual proposals to do so are welcome. For the few cases where status_led2 was used in old diag.sh, only the primary LED was migrated. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
110 lines
2.0 KiB
Plaintext
110 lines
2.0 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "bcm6368.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "ADB P.DG AV4202N";
|
|
compatible = "adb,av4202n", "brcm,bcm6368";
|
|
|
|
aliases {
|
|
led-boot = &led_power_white;
|
|
led-failsafe = &led_power_white;
|
|
led-running = &led_power_white;
|
|
led-upgrade = &led_power_white;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <20>;
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
debounce-interval = <60>;
|
|
};
|
|
|
|
wlan {
|
|
label = "wlan";
|
|
gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WLAN>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power_white: power_white {
|
|
label = "AV4202N:white:power";
|
|
gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
};
|
|
power_red {
|
|
label = "AV4202N:red:power";
|
|
gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
|
|
};
|
|
wan_white {
|
|
label = "AV4202N:white:wan";
|
|
gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
|
|
};
|
|
wan_red {
|
|
label = "AV4202N:red:wan";
|
|
gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
|
|
};
|
|
phone_white {
|
|
label = "AV4202N:white:phone";
|
|
gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
phone_red {
|
|
label = "AV4202N:red:phone";
|
|
gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
|
|
};
|
|
wifi {
|
|
label = "AV4202N:blue:wifi";
|
|
gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pflash {
|
|
status = "ok";
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cfe@0 {
|
|
label = "CFE";
|
|
reg = <0x000000 0x020000>;
|
|
read-only;
|
|
};
|
|
|
|
linux@20000 {
|
|
label = "linux";
|
|
reg = <0x020000 0xfc0000>;
|
|
compatible = "brcm,bcm963xx-imagetag";
|
|
};
|
|
|
|
nvram@fe0000 {
|
|
label = "nvram";
|
|
reg = <0xfe0000 0x020000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "ok";
|
|
};
|