Hauke Mehrtens eee1b34ce6 lantiq: copy target to kernel 4.19
This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-07-04 08:29:13 +02:00

136 lines
2.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "FRITZ736X.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
/ {
compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
model = "AVM FRITZ!Box 7362 SL";
};
&power_green {
label = "fritz7362sl:green:power";
};
&power_red {
label = "fritz7362sl:red:power";
};
&info_green {
label = "fritz7362sl:green:info";
};
&wifi {
label = "fritz7362sl:green:wlan";
};
&info_red {
label = "fritz7362sl:red:info";
};
&dect {
label = "fritz7362sl:green:dect";
};
&gpio {
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
&state_default {
nand {
lantiq,groups = "nand ale", "nand cle",
"nand cs1", "nand rd", "nand rdy";
lantiq,function = "ebu";
};
pcie-rst {
lantiq,pins = "io21";
lantiq,open-drain = <1>;
lantiq,output = <1>;
};
};
&spi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
flash@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <1000000>;
urlader: partition@0 {
reg = <0x0 0x40000>;
label = "urlader";
read-only;
};
partition@40000 {
reg = <0x40000 0x60000>;
label = "tffs (1)";
read-only;
};
partition@A0000 {
reg = <0xA0000 0x60000>;
label = "tffs (2)";
read-only;
};
};
};
&localbus {
nand@1 {
compatible = "lantiq,nand-xway";
lantiq,cs1 = <1>;
bank-width = <1>;
reg = <1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "on-die";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7c00000>;
};
};
};
};
&pcie0 {
gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
pcie@0 {
#size-cells = <1>;
#address-cells = <2>;
};
};