ddfaee36ba
A long time ago, ath9k had issues during reset where the DMA engine would stay active and could potentially corrupt memory. To debug those issues, the driver would print warnings whenever they occur. Nowadays, these issues are gone and the primary cause of these messages is if the MAC is stuck during reset or busy processing a long transmission. This is fairly harmless, yet these messages continue to worry users. To reduce the number of bogus bug reports, turn these messages into debug messages and count their occurence in the "reset" debugfs file. Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46158
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org