Gabor Juhos
ea89cc9250
ar71xx: ag71xx: use mdio bus name in ar7240_probe messages ...
The ar7240_probe function uses the network device name
in the kernel log messages, however the name is not yet
initialized when the ar7240_probe function is called.
Use the mdio bus name in the messages to avoid ugly
log lines like the following one:
eth%d: Found an AR7240/AR9330 built-in switch
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39116
2013-12-17 15:12:52 +00:00
2013-12-16 07:51:21 +00:00
2013-06-27 19:58:31 +00:00
2013-06-05 20:58:59 +00:00
2013-12-15 19:16:30 +00:00
2013-12-17 15:12:52 +00:00
2013-11-17 17:14:32 +00:00
2013-10-23 12:51:05 +00:00
2013-11-07 12:46:16 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:19:16 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
2013-11-10 09:57:07 +00:00
2013-12-15 19:16:30 +00:00
2013-10-13 22:10:57 +00:00
2013-10-01 22:39:28 +00:00
2013-09-26 17:53:20 +00:00
2013-12-16 10:11:00 +00:00
2013-12-17 02:47:20 +00:00
2013-06-27 19:58:31 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
2013-09-26 17:53:20 +00:00
2013-09-26 17:53:28 +00:00
2013-12-16 07:51:21 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
2013-12-14 17:37:14 +00:00
2013-12-15 19:16:30 +00:00
2013-12-14 17:37:14 +00:00
2013-09-26 17:53:20 +00:00
2013-09-26 17:53:20 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
2013-06-27 19:58:31 +00:00
2013-12-16 10:16:33 +00:00
2013-12-16 07:51:21 +00:00
2013-12-15 19:16:30 +00:00
2013-09-26 17:53:14 +00:00
2013-12-15 19:16:30 +00:00
2013-12-14 17:37:14 +00:00
2013-09-24 13:36:42 +00:00
2013-12-15 19:16:30 +00:00
2013-12-15 19:16:30 +00:00
ea89cc9250